Thingiverse
1 1/4 inch grid
von jlerossignol
87
Downloads
50
Likes
0
Makes
This roller aims to create a 1 1/4-inch grid pattern for XPS foam or a similar material.
The edges should cut a 2mm groove.
Roller5 is the 5 tile length roller (about 6 1/4 inches or 15.8 cm), and the Roller6 is 7 1/2 inches or 19 cm.
This is currently untested, I have been about to print similar rollers without supports. However, use your own judgment.
Update: 31/10/2018;
I've added two more 5 square wide rollers. The ModS is slightly smaller and the ModL is slightly larger by about 1/8 of an inch.
Updated 3/11/18;
I've added a file, 1_25in-grid_D__Roller.stl is designed to deal with the slippage that Roak pointed out to me. And remove the other files as the rollers will have created a distored grid.
Updated 02/12/21: Fixed the normals
* Tile Patterns-1_25in-grid_D__Roller_211202.stl
The edges should cut a 2mm groove.
Roller5 is the 5 tile length roller (about 6 1/4 inches or 15.8 cm), and the Roller6 is 7 1/2 inches or 19 cm.
This is currently untested, I have been about to print similar rollers without supports. However, use your own judgment.
Update: 31/10/2018;
I've added two more 5 square wide rollers. The ModS is slightly smaller and the ModL is slightly larger by about 1/8 of an inch.
Updated 3/11/18;
I've added a file, 1_25in-grid_D__Roller.stl is designed to deal with the slippage that Roak pointed out to me. And remove the other files as the rollers will have created a distored grid.
Updated 02/12/21: Fixed the normals
* Tile Patterns-1_25in-grid_D__Roller_211202.stl
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
