Thingiverse
1.1 Minimum Diameter Series
von Ez3D_Rocketry
1
Downloads
1
Likes
0
Makes
#### A set of slide-on external fin cans for high altitude flights.
#### They will never set a FAI record. Or win a competition. But they do maximize the altitude to build time ratio!
#### 1305: 13mm motors in an Estes BT5
#### 1820: 18mm motors in an Estes BT20
#### 2450: 24mm motors in an Estes BT50
#### Two versions for 29mm motors depending on the airframe source. Also has small holes for small screws to hold it all together. Tape may not be enough.
#### Flight Data:
##### 1305: A3-6T ~ 550+ ft
##### 1820: C6-7 ~ 1000+ ft
##### 2450: D12-7 ~ 1200+ ft
##### 2929 Apogee 34" of 29mm Thick Wall Tube: F15-8 ~2000ft (@ 255g)
##### 2929 PML 36" of 29mm Phenolic Motor Tube: F67-9 ~2500ft (@ 310g)
#### They will never set a FAI record. Or win a competition. But they do maximize the altitude to build time ratio!
#### 1305: 13mm motors in an Estes BT5
#### 1820: 18mm motors in an Estes BT20
#### 2450: 24mm motors in an Estes BT50
#### Two versions for 29mm motors depending on the airframe source. Also has small holes for small screws to hold it all together. Tape may not be enough.
#### Flight Data:
##### 1305: A3-6T ~ 550+ ft
##### 1820: C6-7 ~ 1000+ ft
##### 2450: D12-7 ~ 1200+ ft
##### 2929 Apogee 34" of 29mm Thick Wall Tube: F15-8 ~2000ft (@ 255g)
##### 2929 PML 36" of 29mm Phenolic Motor Tube: F67-9 ~2500ft (@ 310g)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!