MakerWorld

1/10 Scale Traffic Cones

by TeamK · RC

901 Downloads

146 Likes

646 Makes

1/10 Scale Traffic Cones that nest together for stacking. Print with the base on the build plate, no supports needed. You might have to turn on ‘Detect Thin Walls’ in Prusaslicer to print properly. Can also print in vase mode, but if you do make sure bottom layers is set to at least 6 with a 0.2mm layer height.

TeamK also publishes on

12 additional models across 1 more platforms

Printables

12 models

♥ 200 ↓ 1,762 ⚒ 11

Frequently Asked Questions

Which 3D printer is suitable for 1/10 Scale Traffic Cones?

Any FDM printer should handle 1/10 Scale Traffic Cones just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does 1/10 Scale Traffic Cones need supports when printing?

No supports needed for 1/10 Scale Traffic Cones — it's designed to print clean off the bed.

What file format is 1/10 Scale Traffic Cones available in?

1/10 Scale Traffic Cones is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is 1/10 Scale Traffic Cones free to download?

Yes, 1/10 Scale Traffic Cones is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

1/10 Scale Traffic Cones

Similar Models

Add to Collection