Thingiverse
1/4" Bit Driver
por kwg08
24
Descargas
19
Likes
0
Makes
I needed a little bit driver for some quick assembly stuff.
So I drew one up.
It fits the bits tight. I have to use pliers to pull the bit out. I made a little hole to put a screw in to hold the bit. But it doesn't need it.
Cause all our printers print a little different....
The "scale_checker.stl" is just the very hex end so you can do a quick check to see if it needs to be scaled. Try that first. Should be about a 5 minute print.
"THE BEER-WARE LICENSE" (Revision 42):
https://www.thingiverse.com/kwg08/ wrote this file.
As long as you retain this notice you
can do whatever you want with this stuff (for non profit uses only.)
If we meet some day, and you think this stuff is worth it, you can buy me a beer in return.
So I drew one up.
It fits the bits tight. I have to use pliers to pull the bit out. I made a little hole to put a screw in to hold the bit. But it doesn't need it.
Cause all our printers print a little different....
The "scale_checker.stl" is just the very hex end so you can do a quick check to see if it needs to be scaled. Try that first. Should be about a 5 minute print.
"THE BEER-WARE LICENSE" (Revision 42):
https://www.thingiverse.com/kwg08/ wrote this file.
As long as you retain this notice you
can do whatever you want with this stuff (for non profit uses only.)
If we meet some day, and you think this stuff is worth it, you can buy me a beer in return.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
