Thingiverse
1.9 Beadlock Wheel 11
327
Download
199
Likes
2
Makes
This beadlock wheel is for 1.9 rc crawler and scaler tires. It is meant to resemble an 8 hole steel wheel. You can use 4 or 8 screws to assemble them.
File naming convention:
GHAABBCCDDT
GH= Goodson's Hobbies
AA= Wheel model #
BB= tire size 19=1.9 22=2.2
CC= wheel width (inside of front and back lip *Note: this is changed from previous wheels)
DD= back spacing, distance from outside of back to inside of hex surface
T= trailer version
For example GH08192110 = Goodson's Hobbies Model 08, 1.9 size, 21mm wide, 10mm of backspacing.
Printing:
I recommend flipping the "back" file 180 degrees to print on the flat surface. Use support on all pieces under the lips.
Recommended hardware:
4-8x M3x8 screws or 4-8x #4 x 5/16 (self tapping screw)
"How to" assembly video here:
https://youtu.be/KSv0bgMx4og
If you print it, I'd love to see it, share here, or tag me on instagram.
Find me on instagram @goodsons_hobbies
File naming convention:
GHAABBCCDDT
GH= Goodson's Hobbies
AA= Wheel model #
BB= tire size 19=1.9 22=2.2
CC= wheel width (inside of front and back lip *Note: this is changed from previous wheels)
DD= back spacing, distance from outside of back to inside of hex surface
T= trailer version
For example GH08192110 = Goodson's Hobbies Model 08, 1.9 size, 21mm wide, 10mm of backspacing.
Printing:
I recommend flipping the "back" file 180 degrees to print on the flat surface. Use support on all pieces under the lips.
Recommended hardware:
4-8x M3x8 screws or 4-8x #4 x 5/16 (self tapping screw)
"How to" assembly video here:
https://youtu.be/KSv0bgMx4og
If you print it, I'd love to see it, share here, or tag me on instagram.
Find me on instagram @goodsons_hobbies
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
