Thingiverse
Gadgets
Go to Model
10 Device Charging Station
246
Downloads
173
Likes
0
Makes
If you have a large family like myself, you've got a lot of devices laying around on your countertop charging. Tables, phones, e-book readers, etc. This thing is a solution to clean up that mess, and free up some counter / desk space. This stand is designed to holdup to 10 devices while charging.
While other chargers may work, this particular charging stand was designed around the Anker 60W 10-Port charger.
This charger be found on Amazon here:
https://www.amazon.com/Anker-10-Port-Charger-PowerPort-iPhone/dp/B00YRYS4T4/ref=sr_1_2?ie=UTF8&qid=1483630741&sr=8-2&keywords=anker+10-port
The charger slides into the center hole at the bottom of the stand, with the USB ports facing forward. I also recommend purchasing some short (6" or so) charging cables. The two holes on the sides can be used to tuck away longer charging cables.
The stand can be used by itself, or if your worried about stability, you can also print the optional base, which will add some additional
While other chargers may work, this particular charging stand was designed around the Anker 60W 10-Port charger.
This charger be found on Amazon here:
https://www.amazon.com/Anker-10-Port-Charger-PowerPort-iPhone/dp/B00YRYS4T4/ref=sr_1_2?ie=UTF8&qid=1483630741&sr=8-2&keywords=anker+10-port
The charger slides into the center hole at the bottom of the stand, with the USB ports facing forward. I also recommend purchasing some short (6" or so) charging cables. The two holes on the sides can be used to tuck away longer charging cables.
The stand can be used by itself, or if your worried about stability, you can also print the optional base, which will add some additional
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
