10 inch Displaycase for Rasperry PI

I needed a sleek, modern-looking case for a 10" touch display, but couldn't find one, so I designed my own. This case includes a fan mount, cooling ports, a stand, a monitor arm and extra internal space for future components.

Update: Finished all parts, printed and tested them for final release. Please let me know if any problems occured. If you are happy with the design leave a like and post your print.

**For assembly, you will need:**
*A 10" touch display* I used this one: https://amzn.eu/d/3j8Gwi8

*8x 1x8mm magnets* (inexpensive and available on Amazon or similar stores).

*M3x5,7x4.6mm heated inserts*: I used these: https://amzn.eu/d/5dyGA80
If you use the stand: 16 pieces,12 without the fan
If you use the monitor arm: 28 pieces in the shortest configuration (2 joints), 24 without the fan


**For the stand assembly:**
*12x M3x5,7x4,6mm treaded inserts* – for every hole on the stand + backcover assembly
*4x M3 x 10mm screws* – to connect the hinge to the back co