10 Inch Rack Mount for Raspberry Pi Compute Module 5 IO Case

Utilizing [WebMaka](https://github.com/WebMaka)'s [Cagemaker PRCG](https://github.com/WebMaka/CageMakerPRCG), I designed this 10" Rack Mount for a [Raspberry Pi Computer Module 5 IO Case](https://www.raspberrypi.com/products/io-case-cm5/) (170mm x 28mm x 94mm). The OpenSCAD used in this project is based on [Version 0.4](https://github.com/WebMaka/CageMakerPRCG/tree/9e39846) of the Cagemaker PRCG.

I've included the OpenSCAD (`rpicm5_io_case.scad`), the STL generated from the OpenSCAD (`rpicm5_io_case.stl`), and a split of the faceplate and the cage into separate STL files for smaller printers (`rpicm5_io_case_front.stl` and `rpicm5_io_case_cage.stl`, respectively).

##### Print Settings

- Brim: Enabled (For Cage Only)
- Supports: Support on build plate only (For Cage Only)
- Infill: 15%