Thingiverse
10" Waveshare Touch Screen Case
door PagliaIndustries
21
Downloads
22
Likes
0
Makes
This is a partial case for the 10.1 inch HDMI LCD Touch Screen by Waveshare.
(There is only the front part of the case. I did not create the back because I did not need it).
Print the front case, Place the screen inside it, and screw the screen to the case. Then, print the case holder and place the front case on the holder. It should now sit in place at a 25 degree angle.
The Sketchup(2019) model is included as well in case you want to modify anything.
Here's the link to the SketchUp model in the 3D Warehouse so you can view it in 360 and download it for the version of SketchUp you need:
https://3dwarehouse.sketchup.com/model/741bab8f-622a-4401-a4d0-f3a15c1dbe2b/101-WaveShare-Screen-Model-Custom-Case
(There is only the front part of the case. I did not create the back because I did not need it).
Print the front case, Place the screen inside it, and screw the screen to the case. Then, print the case holder and place the front case on the holder. It should now sit in place at a 25 degree angle.
The Sketchup(2019) model is included as well in case you want to modify anything.
Here's the link to the SketchUp model in the 3D Warehouse so you can view it in 360 and download it for the version of SketchUp you need:
https://3dwarehouse.sketchup.com/model/741bab8f-622a-4401-a4d0-f3a15c1dbe2b/101-WaveShare-Screen-Model-Custom-Case
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
