100 Sample filament box

This is a color card storage box made using the Bento3D website, capable of holding 100 color cards per box.In addition to the 3D printed parts, hardware is used for the case assembly.Please prepare the following parts in advance :2 * M2 x30mm Pan Head Small Screw2 * 2x28mm Parallel PinIf 2x28mm positioning pins are not available, you can use 30mm ones.Please cut the lower edge according to the picture during installation for easier fitting.這是使用 Bento3D 網站製作的色卡收納盒，每盒可收納100片色卡。除了 3D 列印零件外，外殼組裝還使用硬體。請提前準備以下零件：2 * M2 x30mm 盤頭小螺絲2 * 2x28mm 定位銷如果找不到 2x28mm 的定位銷，您可以使用 30mm 的。安裝時，請按照圖片切除下緣，以便更容易安裝。<img src="https://makerworld.bblmw.