Slicer Discord
100W-LED-Flashlight – 3D printable model from MakerWorld MakerWorld
Electronics

100W-LED-Flashlight

17 Downloads
13 Likes
0 Makes
Go to Model
This project is an ultra bright LED-Flashlight. The Flashlight has a maximum Power output of 100W. A conventional Flashlight has about 0.5-5W. At night I can brighten my entire garden with it. In the future I will make another version with a microcontroller and a display where you can use the flashlight as a stroboscope and also dimm the light. For this build I used following materials:1x 100W LED1x LED Lense1x DC-DC Boost Converter3x <a target="_blank" href="https://de.aliexpress.com/item/1005006336440497.html?spm=a2g0o.productlist.main.5.43092de9v4alJX&algo_pvid=55bc84af-3242-4113-a087-b22e03173b2c&algo_exp_id=55bc84af-3242-4113-a087-b22e03173b2c-2&pdp_npi=4%40dis%21EUR%214.14%211.53%21%21%2131.34%2111.60%21%402101fb1017144676556388902ef606%2112000036803626865%21sea%21DE%211885950532%2
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA, TPU
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection