101ST Airborne

Project: 101ST Airborne.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 179.33x180mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mmFilaments Used: PLA Bambu Basic Black Transmission Distance: 0.1 PLA Bambu Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.5 PLA Bambu Basic Jade White Transmission Distance: 6.3This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #13 (0.64mm) swap to Scarlet Red At layer #18 (0.84mm) swap to Sunflower Yellow At layer #30 (1.32mm) swap to Jade White for the rest.