Thingiverse
Parrot Zik 2.0 battery charger
by kh4
22
Downloads
27
Likes
0
Makes
Charger for Zik2.0 spare battery.
The "_v2" is a two part print to enclose the charging module.
Needs 2 x ~33mm / ~1.36 mm pogo pins and TP4056 breakout to complete.
E.g.
http://www.ebay.com/itm/370885846505
and
http://www.ebay.com/itm/151809771688
NOTE: the TP4056 module linked above is set for 1A charging, Zik battery is max 800mA so it is advisable to change the (1k2) charging resistor to 1k5 to set lower currrent.
The "_v2" is a two part print to enclose the charging module.
Needs 2 x ~33mm / ~1.36 mm pogo pins and TP4056 breakout to complete.
E.g.
http://www.ebay.com/itm/370885846505
and
http://www.ebay.com/itm/151809771688
NOTE: the TP4056 module linked above is set for 1A charging, Zik battery is max 800mA so it is advisable to change the (1k2) charging resistor to 1k5 to set lower currrent.
Sign in to leave a comment
Sign in