11 tooth gear

This is an 11-tooth spur gear that I modified for use in my salad spinner.The original design was a 12mm 11-tooth gear with a 5mm bore created by Matthew Henry (available at www.printables.com/model/310372-12mm-11-tooth-gear-5mm-bore). I made adjustments by adding a central bore to the gear. For best results, I recommend printing with a 0.08mm layer height and a 95% infill percentage for high quality and better durability.I tested it with PLA filament, and I can confirm that it works perfectly. Special thanks to Matthew Henry (www.printables.com/@MatthewHenry) for the design!