Thingiverse
120x36mm COB LED Mount
door WhizzCat
4
Downloads
2
Likes
0
Makes
This is a mount for a 120mm x 36mm COB LED panel. It features a highly sophosticated mechanism for adjusting the panel! E.g. two M4 bolts and nuts. Well, that's it basically. I needed a couple of these for on my workbench to light my H0 model work when doing stuff with it. It should fit, but I haven't printed it yet ...
https://www.ebay.com/itm/1000LM-10W-COB-LED-Strip-Light-High-Power-Lamp-Chip-Warm-Cool-White-12V-24VWTUS-/192783423783?var=&hash=item2ce2c99927
These are the LEDs I used it with. The LED's can be bolted on with M2. In any case, you can add a piece of aluminum between the LED and panel for more cooling. I have four of these in series and at 12v they rock about 1.5A of current. That works fine and they don't get too hot for the PLA.
-Update on V3
I removed the boltholes and replaced it with a simpel system so the nuts and bolts aren't needed anymore to mount the Panel on the Stand. You should be able to "click" it around now :-)
https://www.ebay.com/itm/1000LM-10W-COB-LED-Strip-Light-High-Power-Lamp-Chip-Warm-Cool-White-12V-24VWTUS-/192783423783?var=&hash=item2ce2c99927
These are the LEDs I used it with. The LED's can be bolted on with M2. In any case, you can add a piece of aluminum between the LED and panel for more cooling. I have four of these in series and at 12v they rock about 1.5A of current. That works fine and they don't get too hot for the PLA.
-Update on V3
I removed the boltholes and replaced it with a simpel system so the nuts and bolts aren't needed anymore to mount the Panel on the Stand. You should be able to "click" it around now :-)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!