Micro switch

Needed some end-stop switches for my DIY dremel-cnc, and couldn't find any that worked for me. so I made this :)

If there is interest, I might add a body-part to make it be "always on" by default, like a normal micro-switch. Comment if you want me to...

Parts needed:
- Spring: 6x12mm (1x)
- Screws: M3x20mm (4x)
- Nuts: M3 (5x)
- Washers: M3 (7x)
- Two wires

Printed parts:
1 of every part, except 2 of box_body.stl