Thingiverse
150mm Filter adapter/holder
por Arachnorchis
36
Descargas
26
Likes
0
Makes
**EDIT: Added improved filter mount mk2 (slightly wider and more flexible) and created a modified outer ring to take metal inserts (2x M10 Hex nuts and 4x M4x10mm brass threaded inserts).
To create a working filter adapter, you’ll require the following printed parts:
1x Outer Ring
2x Filter Mount
2x Mounting Ring (guide to choosing correct diameter below)
1x Shroud 102mm with sides- single piece. OR 1x Shroud 102mm (interchangeable sides) and 2x Shroud interchangeable side piece (additional steel bolts required for interchangeable shroud).
2x Retaining Pin
2x M10x 30mm (for larger lenses) or 55mm bolts (for smaller lenses). Recommend purchasing nylon or steel bolts, printed ones are available however.
4x E-clips (can use steel R clips instead, details below)
Additionally, you’ll require:
4x M4 x 35mm bolts (steel)
Optional (but highly recommended)
2x steel springs 0.4mm x 9mm x 25mm (wire diameter x outer diameter x length).
Adhesive felt lining or matte black spra
To create a working filter adapter, you’ll require the following printed parts:
1x Outer Ring
2x Filter Mount
2x Mounting Ring (guide to choosing correct diameter below)
1x Shroud 102mm with sides- single piece. OR 1x Shroud 102mm (interchangeable sides) and 2x Shroud interchangeable side piece (additional steel bolts required for interchangeable shroud).
2x Retaining Pin
2x M10x 30mm (for larger lenses) or 55mm bolts (for smaller lenses). Recommend purchasing nylon or steel bolts, printed ones are available however.
4x E-clips (can use steel R clips instead, details below)
Additionally, you’ll require:
4x M4 x 35mm bolts (steel)
Optional (but highly recommended)
2x steel springs 0.4mm x 9mm x 25mm (wire diameter x outer diameter x length).
Adhesive felt lining or matte black spra
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!