16x16 Led Panel Frame/Display

Display/Housing/Frame for your 16x16 LED-Panel.

How to:
- Assemble the 2 pieces with the 3 x M3 8mm screws
- Solder wires to the panel (plus, minus, data) and feed the three wires trough the corresponding chanel to the electronics appartment located at the backside of the frame.
- Use pieces of foamed double sided tape to fix the panel in place (foam will lift the pad slightly from the gounde so the wires underneath wouldn't cause any deforming waves on the panel
- Slide in the acrylic glas. You can cut it by yourself. Print the file "glas-cutting_template" and use the template to cut a precisely fitting sheet of glas.
- add the electronics at the back. the ESP32 should fit exactly in place.
-add a relais if desired
-flash wled to the esp32
-enjoy


Shopping List:

Screws:
3 x M3 8mm

Power supply:
https://www.amazon.de/gp/product/B08SVX1TH5/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Wires:
https://www.amazon.de/gp/product/B0999BVQYL/ref=ppx_yo_dt_b_asin_t