My Calibration Process

This is the process I use to calibrate each filament. Part of the process I read about a while ago and for the life of me cannot find the site to give credit, if I do I will add it.

I start by printing the 20x20x5mm cube with the following settings in Simplify3d.

Extruder tab
- Extrusion Multiplier - 1.00
- extrusion width - manual - 0.48mm (assuming 0.40mm nozzle)

Layer Tab
- primary layer height - 0.20mm
- top solid layers - o
- bottom solid layers - 0
- outline/perimeter she