170mm drone frame

170mm drone frame that would work with 3" props and 11xx or 12xx motors. anything with a 9mm mounting size.

The holes in the center will fit any 20x20 Flight controller stack and the holes closer to the outside could hold the rx unit or a canopy. i'll post links to parts i used soon. message if you have any questions

i printed it with priline carbon fiber pc and it worked pretty well until i dropped it from about 100 feet. it broke but handled it pretty well. nothing else was damaged.

Print Settings
- 0.25mm layer height
- 1mm Top/Bottom Layer thickness
- 25% gyroid infill