Semi-Tube Cross-bow head Klingon X

IMPORTANT: Due to 'bad design (the screw cylinders are just touching each other)'
most probably you will have trouble to slice the stl file.

I corrected this error by connecting the screw cylinders with a 0.3 mm feature.
The old file is replaced now by the working one. Furthermore I put the sliced
Klingon X (90% infill /. 0.3 mm => 9-10 hours print !!!) in 3w format for
the 'daVinci's'

I apologize for my mistake...

Cross-bow head, need a stock to be attached at !

Same like Glove-