18mm Button Assembly for 6mm Push Buttons

Turn a standard 6x6x5mm electronic push button into a bigger, more user-friendly 18mm push button. Assembles using friction-fit components. Superglue can be added to make things more permanent if needed. This model intentionally leaves the metal leads of the button exposed. My goal is that this model can be easily remixed into other custom projects by just incorporating the Mount piece, available to download as the mount.3mf file. You can see an example of that in my first remix here. Friction-fit tolerances are necessarily pretty tight. The Fusion360 file is included so you can tweak things if needed (see the User Parameters). Alternatively, just do some light sanding/filing to help them fit. AssemblyPay attention to the orientation of the Stem and Cap. The notch in the stem should be visible on the open side of the Guide, and the thickest side of the Cap (with a similar notch in it) should be on the same side as the Stem notch. I.e., the two notches should be almost touching, as show