1988 Mini Racer – 3D printable model from MakerWorld

MakerWorld

Vehicles

1988 Mini Racer

by STLLABS · Vehicles

444 Downloads

134 Likes

281 Makes

Go to Model

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 1988 MINI RACER is a mini version of our older 1988 racecar. SIZE / WEIGHT:Total assembly: Roughly 70 x 45 mmFilament: We used roughly 10 g of filament using 5% infill. MAKEABLE FOR EVERYONE:Largest single part: 70 x 30 mmAlmost no supports: The only recommended support is on the wheel pins.Snap together: Simply press the wheels on! RECOMMENDED SETTINGS:Resolution: 0.2 mm layerheightInfill: 5%Supports: Yes, only needed on the wheel pins!Brim: Not mandatory. SUPPORT:Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: [email protected] free to share your makes with us on Instagram and tag us using @stllabs(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)

f1 formula1 racing race racecar cars car hypercar supercar sportscar automotive mclaren ferrari mercedes aston senna prost mp4

Category

Vehicles

Source

MakerWorld

Published

13.12.2024

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

ABS

Min. bed size

70 mm (Small)

Layer height

0.2 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for 1988 Mini Racer?

Any FDM printer should handle 1988 Mini Racer just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 70 mm is recommended.

Does 1988 Mini Racer need supports when printing?

No supports needed for 1988 Mini Racer — it's designed to print clean off the bed.

What file format is 1988 Mini Racer available in?

1988 Mini Racer is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is 1988 Mini Racer free to download?

Yes, 1988 Mini Racer is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL