1990 Toyota Pickup Voltmeter Bracket

This mount is designed to hold a "Drok 0.56 Inch DC Voltage Meter" on the lower left of a 1990 Toyota Pickup dashboard (see photos). The inexpensive Drok meter is easily available on Amazon or elsewhere, and this part provides a secure, clean way to display the meter so that's it's visible but out-of-the-way and not too obtrusive. (I wanted a way to monitor the actual voltage level of the system, in order to keep an eye of the truck's alternator performance, especially with various accessories in use.)

Note: the larger hole on the top of the bracket allows you to route the meter wires through, and through the dash plastic, to connect with a good power and ground under the dash. There are also two smaller screw holes to fasten the mount to the dash.

The mount can be printed in any rigid filament and shouldn't require any support, if it's oriented correctly on the print bed. Infill of 35% is recommended, although some experimentation might be necessary. Sanding, priming, and painting t