Thingiverse
1x2x2 Heart Cube
por 5284973user
168
Descargas
154
Likes
0
Makes
VIDEO: https://youtu.be/1Is9_XxGSZc
I made this as a simple test for a 19mm-cubie 1x2x2 design, intended for use in future projects. It can hardly be considered a puzzle, since it has something like 3-4 possible positions. The heart extensions were designed and printed after being inspired by the transparent red filament used to print the base "puzzle".
Like many of my designs, this "puzzle" is designed to be assembled without hardware. However, I haven't gotten my peg design quite right yet, so the rim of the peg needs to be trimmed down a bit with some wire cutters in order to fit in the hole. It turns alright straight off the printer, but a little spritz of silicon lube does wonders.
As it is, this is more of a cute fidget toy than a proper twisty puzzle. If I could size it down some more, it would make a nice keychain or bag charm for any twisty puzzle enthusiast.
PARTS LIST:
1x Anchor.stl
1x Ball.stl
3x Edge.stl
1x Heart.stl
I made this as a simple test for a 19mm-cubie 1x2x2 design, intended for use in future projects. It can hardly be considered a puzzle, since it has something like 3-4 possible positions. The heart extensions were designed and printed after being inspired by the transparent red filament used to print the base "puzzle".
Like many of my designs, this "puzzle" is designed to be assembled without hardware. However, I haven't gotten my peg design quite right yet, so the rim of the peg needs to be trimmed down a bit with some wire cutters in order to fit in the hole. It turns alright straight off the printer, but a little spritz of silicon lube does wonders.
As it is, this is more of a cute fidget toy than a proper twisty puzzle. If I could size it down some more, it would make a nice keychain or bag charm for any twisty puzzle enthusiast.
PARTS LIST:
1x Anchor.stl
1x Ball.stl
3x Edge.stl
1x Heart.stl
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
