2.2 "Ez3D Mini" Model Rocket

## Ez3D-Mini
- Great park flyer that uses mini A motors.
- Parts tape together - No glue required!

Tall thin structures (like rockets) can be a challenge to print. Ez3D Rocketry designs use 3D printing for the short, complex parts such as fin cans and nose cones while incorporating commercial cardboard body tubes as airframes.

### Parts List:
1. Ez3D-1350-4 Fin Can
2. BT-50 Nose Cone
3. 13mm Retainer Cap
- Print out the multiple sizes (No scaling, +3%, +5%), These account for different printing tolerances and post flight shrinking.
4. Six (6) inches of BT-50 type body tube
- A standard 18 inch tube makes three kits
- 3D printable tube cutting guide included in repository files
5. Three (3) feet of Kevlar string for Recovery Harness
- Flight tested on 9KM DWLIFE Black Braided Kevlar Cord (1.3mm, 300 lb) but others may work
6. Twelve (12) inches of streamer (Optional)
7. Tape