2.5 "Ez3D Max+" Model Rocket

## The 'Ez3D Max+' Model Rocket
- 3D printed parts for a rocket that flies on Long 24mm motors (Estes E12). Shorter motors can be used with a spacer
- Parts tape together - No glue required!
- Print, Tie, Tape, Fly!

Tall thin structures (like rockets) can be a challenge to print. Ez3D Rocketry designs use 3D printing for the short, complex parts such as fin cans and nose cones while incorporating commercial cardboard body tubes as airframes.




###Parts List:

1. Ez3D-24L60-4 Fin Can
2. BT60 Nose Cone
3. 24mm Retainer Cap
- Print out the multiple sizes (No scaling, +3%, +5%), These account for different printing tolerances and post flight shrinking.
4. Rail Guides
5. Eighteen (18) inches of BT-60 type body tube
- A standard 18 inch tube makes one kit
6. Four (4) feet of Kevlar string for Recovery Harness
- Flight tested on 9KM DWLIFE Black Braided Kevlar Cord (1.3mm, 300 lb) but others may work
7. Twelve (12) inch parachute (Streamer can also be used but it descends fast)