Thingiverse
2.5inch Propeller for fpv drone
2
Download
9
Likes
0
Makes
2.5" propeller for FPV drone.
The running time is about 10% shorter than commercial propellers.
When printing, horizontal expansion of about 0.2mm will give better results.
After printing, polish the surface smooth with sandpaper.
When using a press-fit propeller, the centre axis should be prepared with a drill or reamer of about 1.45mm diameter.
The running time is about 10% shorter than commercial propellers.
When printing, horizontal expansion of about 0.2mm will give better results.
After printing, polish the surface smooth with sandpaper.
When using a press-fit propeller, the centre axis should be prepared with a drill or reamer of about 1.45mm diameter.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
