Thingiverse
2-Button Flight Stick Grip
20
Downloads
13
Likes
0
Makes
19mm is 3/4" tube (close enough)
22mm is 7/8" tube (close enough)
If you need to scale this up or down for the control column diameter, you'll screw up the switch holes and may need to do a little touch-up with a drill.
The switches I used for the design need a 7mm shaft and 10mm nut in order for the 14mm OD socket to fit in the impression.
I used these Twidec switches from Amazon... https://www.amazon.ca/dp/B07RW2YZ4W/ref=cm_sw_em_r_mt_dp_MZSBMDMBEE17QNH7JZD5?_encoding=UTF8&psc=1
22mm is 7/8" tube (close enough)
If you need to scale this up or down for the control column diameter, you'll screw up the switch holes and may need to do a little touch-up with a drill.
The switches I used for the design need a 7mm shaft and 10mm nut in order for the 14mm OD socket to fit in the impression.
I used these Twidec switches from Amazon... https://www.amazon.ca/dp/B07RW2YZ4W/ref=cm_sw_em_r_mt_dp_MZSBMDMBEE17QNH7JZD5?_encoding=UTF8&psc=1
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
![[flexi] EAA logo rectangle](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUS185b907a6a36fb%2Fdesign%2F9ced5905cde80f3f.png&w=400&h=300)