Thingiverse
2" copper bulkhead fitting spanner tool
par Henryhere
0
Téléchargements
1
Likes
0
Makes
I was fitting a copper bulkhead fitting for 2" pipe. My spanner collection didn't cover the size.
Probably could have got by with something, but decided to try this project.
24mm socket/spanner of 1/2" drive ratchet can be used to turn the tool.
Tool is only required to nip-up the fitting, it is being used in a low pressure application. The tool might not be suitable for applications requiring high torque.
It is of no use when trying to tighten the nut/olive onto the pipe as a high torque is required.
The "nut for the fitting and the "nut" for tightening onto the olive are different "across flats" size
Probably could have got by with something, but decided to try this project.
24mm socket/spanner of 1/2" drive ratchet can be used to turn the tool.
Tool is only required to nip-up the fitting, it is being used in a low pressure application. The tool might not be suitable for applications requiring high torque.
It is of no use when trying to tighten the nut/olive onto the pipe as a high torque is required.
The "nut for the fitting and the "nut" for tightening onto the olive are different "across flats" size
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
