2 Gallon Bucket Dolly

This is a rolling dolly designed for the ace hardware / home depot 2 gallon bucket. It's a little tighter on the HD bucket than it is on the Ace bucket but both fit. I have my buckets full of ceramic glaze and the dolly seems to be holding up just fine. I added extra support ribs since printing my own just for others' safety. The dolly is 4 prints of the same corner piece. They all fit in one plate if using snug supports! It uses four swivel casters, 24 M4 hex inserts, and 24 M4 x 10mm screws. I used torx button heads but you can really use whatever - there should be enough clearance for any standard socket head. I also used moderately expensive inserts - you can edit the STEP to fit yours, or just glue in whatever. Or just glue the whole thing together, I don't make the rules. I realize that printing this is likely not cheaper than buying these dollies somewhere locally, but I had all these parts on-hand and my trusty X1C so here it is :)