200A Shunt Holder

I took inspiration from the model [thing:4308802](https://www.thingiverse.com/thing:4308802/) which I've marked this as a remix of but I completely rebuilt it in sketch-up with some of the same dimensions. I've changed size of the countersunk hex head to fit a 14mm or 9/16 inch bolt head which is the size that came with my shunt. I made the counter sink deep enough to accept the bolt or nut and rotated it to allow printing without supports. I increased the riser to lift the shunt slightly off the base and increased the mounting holes size slightly with an added counter sink. Doesn't require supports. I used PETG but obviously any filament would work.

The shunt and display can be bought from AliExpress here...
https://www.aliexpress.com/item/2255799860138813.html?spm=a2g0o.order_list.0.0.14ea1802ssFOGU&gatewayAdapt=4itemAdapt
These can be found by many different sellers. Shop around for the best deal. Make sure to select the 200A option for this to fit.

Update: Rev2 version is u