Thingiverse
200mm H-Quad
par l_d
13
Téléchargements
7
Likes
0
Makes
This is a small FPV quadcopter frame I designed for myself.
The design is very modular so you can print all the components individually and take replacement-parts into the field.
The frame is very stiff and will tolerate some abuse, however harder crashes will likely break it so print some spares if you are testing it out.
My setup with the frame fully assembled, all the electronics, motors and a battery weighs about 480g.
You will need some additional hardware for assembly:
- 8x M4x16 Bolts and Nuts for the motor arms
- 6x M4x50 Bolts and Nuts for the main frame (I suggest trimming the bolts to exact length for cleaner appearance)
As usual: Use your own judgement on which print settings to choose and have fun!
The design is very modular so you can print all the components individually and take replacement-parts into the field.
The frame is very stiff and will tolerate some abuse, however harder crashes will likely break it so print some spares if you are testing it out.
My setup with the frame fully assembled, all the electronics, motors and a battery weighs about 480g.
You will need some additional hardware for assembly:
- 8x M4x16 Bolts and Nuts for the motor arms
- 6x M4x50 Bolts and Nuts for the main frame (I suggest trimming the bolts to exact length for cleaner appearance)
As usual: Use your own judgement on which print settings to choose and have fun!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
