200mm Resin Curing Station

This is my solution to a curing station for the larger build volume of the ELEGOO Saturn. I have added another cover design so users of other resin printers can utilize another logo. Please let me know in the comments or messages if you have any suggestions for updates or modifications. Any constructive inputs on the design are appreciated!

The interior volume capability is 200x200x200mm. Height is measured from the top of the listed UV powered turntable although I plan to install a larger turntable in the future for heavier prints.

The Build:

I removed the glass retainer screws from UV light so everything would fit more snug since the screws protrude too far out the back of the light.

I used a soldering iron to melt the fittings into the back of the UV_Retainer. You might need to use an 1/8inch drill bit to ream out the M3 holes and a 3/16 drill bit to ream out the back side of the UV_Retainer so the fittings melt in better. Be sure to melt them in straight so the M3 screw