Thingiverse
HICTOP Prusa E3D V6 X Carriage Mod
by cartledge555
40
Downloads
19
Likes
2
Makes
This is a mod which allows the use of the E3D V6 hotend with the HICTOP Prusa i3 printer.
It uses a radial fan shroud (credit to adafruit {http://www.thingiverse.com/thing:1652852}) compatible with the 50mm radial fan that comes with the printer. The shroud will sit 1-2mm above the printed surface.
Because the stepper motor is now orientated in the x direction rather than the y, the hotend is situated on the left so that no print area is lost. This means that the stock extruder parts **(ex
It uses a radial fan shroud (credit to adafruit {http://www.thingiverse.com/thing:1652852}) compatible with the 50mm radial fan that comes with the printer. The shroud will sit 1-2mm above the printed surface.
Because the stepper motor is now orientated in the x direction rather than the y, the hotend is situated on the left so that no print area is lost. This means that the stock extruder parts **(ex
Sign in to leave a comment
Sign in