Thingiverse
2020 Trinket Mount
door elemgee
10
Downloads
7
Likes
0
Makes
needed a 2020 mount for a Trinket 5V
(used to preprocess the FSR-signals for automatic bed-leveling in my Mini)
but didn't really like any of the ones around, so I made this.
the center hole is meant for a M4x8 maybe M4x10 and a drop in T-Nut.
the 4 holes for mounting the trinket are deliberately smaller, so you can use small wood screws or drill them to a diameter that suits.
I used a pair of stray M2.5s to mount the board and it's very secure.
(used to preprocess the FSR-signals for automatic bed-leveling in my Mini)
but didn't really like any of the ones around, so I made this.
the center hole is meant for a M4x8 maybe M4x10 and a drop in T-Nut.
the 4 holes for mounting the trinket are deliberately smaller, so you can use small wood screws or drill them to a diameter that suits.
I used a pair of stray M2.5s to mount the board and it's very secure.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
