2025 CFP CHAMPS

My first attempt at doing a Hueforge print that has a model attached to it. my print came out just as I thought it would I hope yours does as wellProject: 2025 champs.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x195.65mm in sizeYou may print at higher layer heights below the Min Depth of 2mmThe Max Depth is 5mm and the Actual Depth is 3.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite Red Transmission Distance: 1 PLA polyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #28 (2.32mm) swap to Blue Gray At layer #29 (2.4mm) swap to Grey At layer #33 (2.72mm) swap to Red At layer #34 (2.8mm) swap to White for the rest.