20mm screwdriver set holder.

Needed a stand to keep my drivers tidy. It is progressively levelled to help make finding the right driver easy. I designed this with popular 20mm diameter drivers in mind. Unfortunately wider one's will likely not fit due to the size of the driver holes. I have provided a file for printed 30mm spacers if you would prefer not to buy separate anodized ones. Additionally, I've listed M3x10mm screws for assembly. You could likely get away with other lengths, but these are what I would recommend as they have worked well for my version. Assembly tips/ instructions:Attach 4 spacers to both the top and middle plates using 8 M3 screws. laying the top plate flat with spacers pointing up, position the middle plate with spacers pointing up above the top plate. Locate by aligning the countersunk screw holes with the spacers and then fasten together with 4 M3 screws. Finally, attach the bottom plate to the middle plate's spacers. Again, locate by aligning the countersunk holes of the bottom plate w