Hictop i3 Z Top Bearing Guide

I redesigned the top of the z axis as to increase reliability of my Hictop i3.

These are the bearings I used:
https://www.amazon.com/gp/product/B002BBD6X4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

The screws at the top are to hold down the Liner Rods. When you print the part there will be a hole above the rods. You will need to tap the hole with an M6 Bolt.. Before you screw it on add a jam nut and the a lock washer. Get a bolt long enough to accommodate the nut and washer with a little