Duplicator i3 y-axis NEMA motor mount

I had a problem with the NEMA motor mount for the y-axis wiggling. I designed this so that I would not have to drill the frame. It can be quite hard to mount.

Instructions:
1. Remove the old motor and mount from the printer
2. Remove the motor from the old mount.
3. Remove the rear bolts from the motor.
4. Attach the new mount to the printer (I used M3x10, lock nuts and 2 washer/bolt).
5. Loosen the right guide rail.
6. Bolt the motor to the mount (I used M3x35 and M3x10 and washer).
7