Raise3D N2/2+ kit for mosaicmanufacturing palette

This kit is dedicated to connect encoder to any extruder with OD 4mm pneufit plug
Encoder mount could be attache within original carter screw or into filament roll area

09/04/17
New solution for extend/coupling N2 N2+ bowden
need:

some cm of PTFE tube ID4mm OD6 mm and ID2 mm OD 4mm

1 x small collar

1 x air gun or solder station@ 260°C

1 x 5 mm drill (use non drill side)

et voila
https://youtu.be/JE3wm57qrxE