Thingiverse
USBasp Case
by Leo_N
38
Downloads
33
Likes
3
Makes
This case is meant to be used with the USBasp V2.0 programmer from LC Technology.
The USBasp is a USB in-circuit programmer for Atmel AVR controllers and e.g. can be used if you brink your Anet main board while trying to update the firmware.
You can either print the lid with a translucent filament or you can use any other normal color. In case of normal color open the small holes with a sharp knife to see the led status.
Two small 2mm self tapping screws 8-10mm in length are needed to ass
The USBasp is a USB in-circuit programmer for Atmel AVR controllers and e.g. can be used if you brink your Anet main board while trying to update the firmware.
You can either print the lid with a translucent filament or you can use any other normal color. In case of normal color open the small holes with a sharp knife to see the led status.
Two small 2mm self tapping screws 8-10mm in length are needed to ass
Sign in to leave a comment
Sign in