Geared Rope Maker

This is my first attempt at a geared rope maker.

Notes:

* The screws are pretty weak, so you may be better off with nylon ones.
* At 0.25 layer height, the screws should not need post-processing, but the threaded holes will.
* For best results you either need a M6x1 tap, or a metal M6x1 screw with a groove cut in it to clean up the inside threads.

Updates:

* Only the 3 screws that hold the frame together are needed, v2 has the extra holes and threads removed.
* I redid the hooks t