Thingiverse
Malyan M150 Y Axis idler upgrade and belt tensioner
by lucafx
37
Downloads
14
Likes
0
Makes
This is my Y-axis upgrade for Malyan M150 with original belt.
The original belt idler and tensioner is free to move and rotate so I redesigned it to make the Y-axis more rigid and easier to adjust for belt tension.
Attention: you have to drill 2 new holes in the front frame. Do at your own risk. Measure carefully before drill.
This idler uses more common F624 bearing (also normal 624zz are suitable).
I printed all the parts in nGen but also PLA should works at 0.2mm, 100%infill, 2 perimete
The original belt idler and tensioner is free to move and rotate so I redesigned it to make the Y-axis more rigid and easier to adjust for belt tension.
Attention: you have to drill 2 new holes in the front frame. Do at your own risk. Measure carefully before drill.
This idler uses more common F624 bearing (also normal 624zz are suitable).
I printed all the parts in nGen but also PLA should works at 0.2mm, 100%infill, 2 perimete
Sign in to leave a comment
Sign in