Sink sponge holder

This is a sponge holder. You put it over your sink divider. Drain holes at the bottom to keep your song dry.

Measurements :
object/material thickness 4.75mm
will hold sponge with width of 20.65 mm, length of holder 40 mm
sink divider opening about 38 mm (sink with divider any bigger will not fit)

Print with 26% infill, 0.3063 mm for Monoprice Mini Select 3D (or 0.3 mm for others).
PLA material, 225 hot end temperature, 8mm/s speed, 45 heated bed.