KingKong 90GT 20mmx20mm Adapters

The stock mounting holes on the 90GT frame is 19mmx27mm. These adapters will allow you to use a standard 20mmx20mm 4-in-1 ESC and flight controller. You will need to thread the holes with a M3x0.5 tap. Then use M3x6mm nylon screws and standoffs.

Best printed on ABS.

Parts needed to mount a board.

4 - M3x6mm Screws
4 - M3x5.25mm Screws
4 - M3x6mm Male-Female threaded hex standoffs