Thingiverse
XT60 Cover and Strap
156
Downloads
177
Likes
1
Makes
Cap for XT60 connector.
Printed at 0.2mm layer height and using PETG to ensure flexibility for the tail. I would recommend printing at least two of these at the same time and space them well apart to prevent deformation from radiant extruder heat. Also, printing these slowly to ensure the little clips that grasp the cable print properly.
Not sure how well ABS or PLA will work.
[Design file](https://cad.onshape.com/documents/b7bf7d87477a97b19005ab97/w/9e11646319b0cfd02bd63fea/e/e03df68d8
Printed at 0.2mm layer height and using PETG to ensure flexibility for the tail. I would recommend printing at least two of these at the same time and space them well apart to prevent deformation from radiant extruder heat. Also, printing these slowly to ensure the little clips that grasp the cable print properly.
Not sure how well ABS or PLA will work.
[Design file](https://cad.onshape.com/documents/b7bf7d87477a97b19005ab97/w/9e11646319b0cfd02bd63fea/e/e03df68d8
Sign in to leave a comment
Sign in