Wanhao Duplicator i3 120mm PSU Cover for Ikea Lack

I wanted a 120mm Shroud that would work to be mounted under an Ikea Lack 3d Printer Enclosure. I remixed Korzar's design to work for this application.

The shroud is made to extend the fan downward, the cable exits to the bottom and the switch will be on the left, as you look at the unit.

Use self-tapping screws to mount the fan from the outside. M4x40mm screws (if using a 25mm deep fan) work. To attach the shoot to the case, use M3x8mm screws.

It's intended to be used with an under-moun