Thingiverse
NAS server case for mini ITX motherboard and 5 HDDs / SSDs
by fr33s7yl0r
136
Downloads
89
Likes
0
Makes
This is my little project for my ASRock AM1H-ITX home NAS. I use 4 HDDs for RAID and one SSD for Linux.
It uses 4 neodymium magnets (12mm by 2mm) to hold the top and bottom together. The magnet holders are printed separately and glued on with hot glue. This is due to the smallest possible size of this case (just around the mini-ITX mobo specs) so the mobo will not go in if the magnet holders are printed with the bottom.
Two small holes in front are for the power LED and HDD LED, hole in th
It uses 4 neodymium magnets (12mm by 2mm) to hold the top and bottom together. The magnet holders are printed separately and glued on with hot glue. This is due to the smallest possible size of this case (just around the mini-ITX mobo specs) so the mobo will not go in if the magnet holders are printed with the bottom.
Two small holes in front are for the power LED and HDD LED, hole in th
Sign in to leave a comment
Sign in