Inmoov Bicep Frame ,Dwg Format

Many Thanks to- Mr Gael- Inmoov’s Designer

These are the Bicep Frames Converted to .Dwg Format- for CNC/Laser Cuting there are all 7.5mm Thick but 7mm or 8mm “should” work fine,,,

For the 2 Stage Potentiometer Hole on the Bicep frame I have removed the 13.5mm Dia hole and just kept the 5mm Potentiometer shaft hole (used as a pilot hole),,,,, then you can just use a drillpress to drill it out to the size of your Potentiometer----- the original hole is 13.5mm Dia and is 5.7 mm deep,,,,